ADTRAN ATLAS 800PLUS User Manual
Page 4
iv
ATLAS 800
PLUS
User Manual
61200226L1-1
FCC regulations require that the following information be provided to the customer in this manual:
1.
This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom
of the chassis.
2.
An FCC compliant telephone cord and modular plug are provided with this equipment. This
equipment is designed to be connected to the telephone network or premises wiring using a com-
patible modular jack which is Part 68 compliant. See Installation Instructions for details.
3.
If your telephone equipment (ATLAS) causes harm to the telephone network, the telephone com-
pany may discontinue your service temporarily. If possible, they will notify you in advance. But
if advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your
right to file a complaint with the FCC.
4.
Your telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of your equipment. If they do, you will be given advance
notice to give you an opportunity to maintain uninterrupted service.
5.
If you experience trouble with this equipment (ATLAS), please contact ADTRAN at (205) 963-8000
for repair/ warranty information. The telephone company may ask you to disconnect this equip-
ment from the network until the problem has been corrected, or until you are sure the equipment
is not malfunctioning.
6.
This unit contains no user-serviceable parts.
7.
The following information may be required when applying to your local telephone company for
leased line facilities.
Service Type
REN/SOC
FIC
USOC
1.544 Mbps - SF
6.0N
04DU9-BN
RJ48C
1.544 Mbps - SF and B8ZS
6.0N
04DU9-DN
RJ48C
1.544 Mbps - ESF
6.0N
04DU9-1KN
RJ48C
1.544 Mbps - ESF and B8ZS
6.0N
04DU9-1SN
RJ48C
ISDN
6.0N
04DU9-ISN
RJ48C