ADTRAN ATLAS 800PLUS - Manual (Page 79)

Chapter 5. Using the Terminal Menu
61200226L1-1 ATLAS _ 800 PLUS User Manual 5-27
Performance: 15 Min
Write security: 3; Read security: 5
In the Performance 15 min. menu, the Performance data for the previous 15
minute window is stored. Refer to “Performance: Current” on page 5-26 for a
detailed description.
Performance: 24 Hr.
Write security: 3; Read security: 5
In the Performance 24 hr. menu, the performance data for the previous 24 hour
window is stored. Refer to “Performance: Current” on page 5-26 for a detailed
description.
Configuration
All of the configurable parameters apply to whether the port is connected to a Pri-
mary Rate ISDN circuit or a Channelized T1 circuit—dedicated or switched.
UAS Unavailable Seconds.
LCV Line Code Violations.
RCV Path Code.
LES Line Errored Seconds.
This Configuration submenu... Does this...
Prt
Read security: 5 Identifies the port number.
Port Name
Write security: 3; Read security: 5 Accepts any alphanumeric name up to 16 characters
long to uniquely identify each port.
Frame
Write security: 2; Read security: 5 Matches the frame format of the circuit to which it is
connected (available from the network supplier).
Code
Write security: 2; Read security: 5 Matches the line code of the circuit to which it is
connected (available from the network supplier).
Tx Yellow
(Auto Tx Yellow Alarm)
Write security: 3; Read security: 5 Enables and disables the transmitting of yellow alarms.
Tx PRMs
(Transmit PRMs)
Write security: 3; Read security: 5 Enables and disables the sending of PRM data on the
facility data link (FDL). The PRM data continues to be
collected even if XMIT PRM is disabled (possible only
with ESF format).
LBO (Line Build Out)
Write security: 2; Read security: 5 Depends on whether the circuit is provisioned for DS1
by the telephone company.
LB Accept (Loopback Accept)
Write security: 3; Read security: 5 Sets unit to accept or reject the in-band loop up and
loop down codes as defined in ANSI T1.403. This is a
line loopback.
Field... Provides this status information...