ADTRAN ATLAS 800PLUS - Manual (Page 84)

Chapter 5. Using the Terminal Menu
5-32 ATLAS _ 800 PLUS User Manual 61200226L1-1
Defining Trunk Conditioning
Write security: 3; Read security: 5
Fault signaling is only visible when RBS is on.
TO Slot
Write security: 3; Read security: 5
This is the same as From Slot (described on page 5-30) except this
option designates the second end of a connection.
Port
Write security: 3; Read security: 5
This option selects which port of the To Slot will be used for the sec-
ond connection. When you select this option, a list of all the slots and
available modules displays. Select the appropriate slot.
To Config
Write security: 3; Read security: 5
Specifies the configuration for the To connection. The selections that
display in this field are based on the type of module selected in the
TO Slot option. You must input the following information (based on
the type). The same options for setting DS0s are available for this
command as with the FROM Config option.
RBS (robbed bit signaling)
Write security: 3; Read security: 5
Defines whether the connection has active robbed bit signaling.
Where RBS is not an option, ATLAS
_ 800
PLUS
automatically assigns
the correct setting. (For example, a T1-to-Nx connection is set to Off .)
Activate Time
Write security: 3; Read security: 5
Sets the time when the map will become active if you select
AUTO in the
Activate Map field. Enter this time in hh:mm:ss 24-hour format. If you use this
Fault Signaling Defines to ATLAS the type of signaling being
used on the trunk (E&M; LS/GS Network or
User; SW56; Custom).
Fault State Final fault signaling state (Trunk Idle or Seized).
Idle would normally be used for one-way trunks
(only used for outgoing or incoming calls—not
both). Seized would normally be used for two-
way trunks. This would prevent the PBX from
attempting to use a failed trunk for an outgoing
call.
Custom This permits the user to define the Fault
signaling to use in the form of A/B set to 1/0.
On Preserves the signaling bits between the connections.
Off Ignores signaling bits.