ADTRAN ATLAS 800PLUS - Manual (Page 72)

Chapter 5. Using the Terminal Menu
5-20 ATLAS _ 800 PLUS User Manual 61200226L1-1
Previous Update Status
Read security: 5
Displays the status of the previous update.
Begin Firmware Update
Write security: 1; Read security: 5
Begins updating the firmware for the selected modules.
Update Status
Read security: 5
Displays the status of the current firmware update. All items are read-only. All of
the fields are defined in the previous section, “Current Update Status” on page 5-
19.
Config Transfer
Write security: 3; Read security: 5
Transfers a file containing the ATLAS
_ 800
PLUS
configuration to a file on a TFTP
server using the TFTP protocol (a TCP/IP user protocol) through the 10BaseT
Ethernet port. Config Transfer lets you save the ATLAS
_ 800
PLUS
configuration as a
backup file. You can then use the same configuration with multiple ATLAS _
800
PLUS
units.
You can also use Config Transfer to retrieve a configuration file from a TFTP server.
ADTRAN delivers a TFTP program with ATLAS
_ 800
PLUS
called TFTP Server. You
can configure any PC running Microsoft Windows with this software to store the
configuration file. See “TFTP Server” on page 10-4 for details on how to use the
TFTP Server software with these menu items to transfer configuration files.
Before using this command, the ATLAS 800
PLUS
should have a valid IP address,
subnet mask, and default gateway (if required), and should be connected to an
Ethernet network.
Only one configuration transfer session (upload or download) can be active at a
time. The TCP/IP parameters are not saved or overwritten as part of an ATLAS
800
PLUS
unit’s transferred configuration to allow sending identical configurations
to multiple units.
Transfer Method
Write security: 3; Read security: 5
Displays the method used to transfer the configuration file to or from a server.
Currently, you must use TFTP.
This field... Does this...
Type Defines the type of module for each slot.
Current Status Indicates the status of the current update.
Previous Status Indicates the status of the previous update.
Previous Time Indicates the time of the previous update.