ADTRAN ATLAS 800PLUS - Manual (Page 85)

Chapter 5. Using the Terminal Menu
61200226L1-1 ATLAS _ 800 PLUS User Manual 5-33
option, you can select AUTO in the Activate Map field (see “Activate Map” on
page 5-29).
Enbl Day
Write security: 3; Read security: 5
Specifies which days of the week the map is active.
Dial Plan
Write security: 3; Read security: 5
Dial Plan includes menus for setting global ATLAS switch parameters and for set-
ting individual parameters for each port in ATLAS that handles a switched call
(see Figure 5-10). The individual ports are separated into two groups—network
ports which terminate a connection from the Network and User ports which ter-
minate incoming calls and in turn may be connected to user equipment.
Figure 5-10. Dial Plan Menu
In the menus described in the following sections, Incoming Calls refers to calls
coming to ATLAS from the Network (PSTN) and Outgoing Calls refers to calls
directed toward the Network (PSTN).
Network Term (Terminations)
This menu allows the user to define option parameters for ports which terminate
a connection from the Network (PSTN).
In applications where two ATLAS units are used in a point-to-point configura-
tion, a port in the ATLAS at one end would act as the Network (User Termina-
tion), while the ATLAS at the opposite end would be terminating a “Network”
connection.
This menu includes a submenu (Interface Configuration) which varies with port
type. The section “Interface Configuration” on page 5-41 reflects the options for
port types which existed at the release of this manual. This information will also
be reflected in the manuals for individual option module types. If the option mod-