ADTRAN ATLAS 800PLUS User Manual
Page 76
Chapter 5. Using the Terminal Menu
5-24
ATLAS
_
800
PLUS
User Manual
61200226L1-1
If a module is installed, the module type automatically displays the name of the
installed module, and cannot be set to any other option.
Menu
Displays additional status and configuration menus for the selected module. To
access the submenus for this item, use the
Arrow Keys
to scroll to the
Menu
col-
umn for the module you want to edit, and press
Enter
. For detailed information
on each submenu item, see “ATLAS_ 800PLUS Controller T1/PRI Submenu
Items” on page 5-25.
Only the submenu items for the base T1/PRI menus are described in this manual.
Alarm
Read security: 5
Displays whether there is an alarm condition on the ATLAS
_
800
PLUS
base unit.
Press
Enter
to access the Alarm menu. (Read-only field.)
Test
Read security: 5
Displays whether the ATLAS
_
800
PLUS
is executing a test. To initiate a test, choose
the Menu submenu on this screen. Then, select the
Test
option to access the screen
that allows you to set up and initiate tests. See “Test” on page 5-24 for details.
Press
Enter
to access the Test menu.
State
Write security: 3; Read security: 5
Displays whether the module is online of offline. Even though a module is physi-
cally installed, it must be marked
Online
for it to be considered an available
resource. This parameter allows an installed module to be marked
Offline
, which
may be useful in system troubleshooting. If you choose
Offline
, the module will
not be in alarm condition, but will display
Offline
.
Once a module is installed, you must change the state to Online in order for the
ATLAS to utilize the module for any data bandwidth.
Status
Read security: 5
Displays status information on the ATLAS
_
800
PLUS
T1/PRI ports and other
installed modules. The following messages may display:
Online
The module is enabled and is responding to the system controller’s status
polls. This is the normal response of the system.
No Response
The module is enabled but is not responding to the system controller’s status
polls. This response indicates a problem in the system or that the module is
not installed.