ADTRAN ATLAS 800PLUS - Manual (Page 71)

Chapter 5. Using the Terminal Menu
61200226L1-1 ATLAS _ 800 PLUS User Manual 5-19
ing you to select Slot 1 through Slot 8 or All Modules of a Type (this is useful if
there are several identical modules installed in the ATLAS
_ 800
PLUS
).
Module Type
Write security: 1; Read security: 5
Displays the type of module that is selected in the Module Slot option.
If you selected All Modules of a Type in the Module Slot field, the Module Type
option allows you to select a particular module type to update all modules of
that type.
Transfer Method
Write security: 1; Read security: 5
Indicates the configured transfer method to use in updating firmware. XMO-
DEM transfers files by connecting to a communications program that sup-
ports XMODEM uploading to the terminal interface. TFTP transfers software
using TFTP protocol by specifying an appropriate server address and file-
name.
TFTP Server IP Address
Write security: 1; Read security: 5
Configures the IP address of the TFTP server on which the update file resides.
TFTP Server Filename
Write security: 1; Read security: 5
Identifies the name of the update file to retrieve from the TFTP server. Enter
the full path name and filename for the file.
Restart Schedule
Write security: 1; Read security: 5
Indicates when to restart the module that is being updated. Restart Immedi-
ately After Update restarts the module immediately after the update is com-
plete. Restart At Specified Date and Time allows you to select when the
updated module will restart. If you select this option, a new field called
Restart Date And Time displays below the current field.
Restart Date and Time
Write security: 1; Read security: 5
Defines the day and time to restart the system after updating firmware. Enter
the time in 24-hour format (such as 23:00:00 for 11:00 pm). Enter the date in
mm-dd-yyyy format (for example, 09-30-1998). This field only displays if
Restart Schedule is set to
Restart At Specified Date and Time.
Current Update Status
Read security: 5
Displays the status of the current update. This field is read-only.
If you are updating several modules at the same time (if Module Slot is set to
All Modules of a Type), this option only displays
[+] , indicating this field con-
tains submenu items. Select [+] and press Enter to display the following fields: