Vaisala Hydromet Data Collection Platform - Manual (Page 119)

Chapter 4 ___________________________________________________________ Troubleshooting
VAISALA______________________________________________________________________ 117
can be accessed as explained in section Opening a Service
Connection through QML Logger on page 120 .
d. For troubleshooting instructions on IP-based
communications, refer to the Vaisala HydroMet™ Data
Collection Platform User’s Guide, Volume 2.
7. Data is not stored to a memory card.
a. Check the status of the memory card. It is indicated by a LED.
Table 31 on page 128 describes the different blinking
sequences and the card conditions they indicate.
b. Check that the memory card has been formatted before use.
For more information, refer to section
Using External
Memory Card on page 128 .
Is the QML logger still not functioning? Replace the logger and return
the damaged one to Vaisala for repair. For return instructions, refer to
section
Technical Support on page 138 .
Visual Check
Open the enclosure and check that all the equipment is present. Check
that the QML logger, power supply, and communication devices are
connected properly.
Remove the cover of the logger for visually checking the CPU board
and other components located under the cover. In
Figure 58 on page
118 , the logger is shown without the cover and the optional
communication modules.