Measurement enable or disable, Figure 47, Output of the logstatus command – Vaisala Hydromet Data Collection Platform User Manual
Page 90: Information, see section, Output of the commands, see
Advertising
User's Guide ______________________________________________________________________
88 ___________________________________________________________________M210784EN-E
0802-154
Figure 47
Output of the Logstatus Command
Measurement Enable or Disable
You can manually enable or disable all measurement inputs and
sensors. You can use this feature, for example, for the following
purposes:
-
Remotely changing the readings of a faulty sensor to be flagged as
invalid.
-
Marking all sensor readings invalid during a maintenance
operation.
Advertising