Other commands, Opening the transmitter in poll mode – Vaisala MMT162 User Manual
Page 42
Advertising
User's Guide ______________________________________________________________________
40 __________________________________________________________________ M210934EN-C
Other Commands
Opening the Transmitter in POLL Mode
Use the OPEN command to connect to a transmitter that is in POLL
mode.
OPEN [aaa]<cr>
where
aaa
= address (0 ... 255)
Example:
open 0
MMT162 0 line opened for operator commands
Closing the Connection to a Transmitter
in POLL Mode
The CLOSE command closes the connection to the transmitter.
CLOSE<cr>
Example:
close
line closed
Advertising