Reset transmitter, Restore factory settings – Vaisala MMT162 User Manual
Page 44
Advertising
User's Guide ______________________________________________________________________
42 __________________________________________________________________ M210934EN-C
Reset Transmitter
When the RESET command is given, the transmitter will restart as if it
had just been powered on. All transmitter settings are retained. The serial
line mode of the transmitter will be set to the mode that was set using the
SMODE command.
RESET<cr>
Restore Factory Settings
Use the FRESTORE command to restore the factory settings to the
transmitter. All user settings will be lost.
FRESTORE<cr>
Advertising