Campbell Scientific CC5MPX and CC5MPXWD Digital Network Cameras - Manual (Page 101)

17-1
Section 17. Remote Image Retrieval
Once the camera has transferred an image or video to a datalogger, existing
LoggerNet communications can be used to retrieve images and video remotely
from the datalogger memory.
17.1 LoggerNet File Retrieval
LoggerNet (Version 4.0 or newer) includes the File Retrieval setup that
facilitates the image and video file retrieval from PakBus dataloggers (CR800
series, CR1000, and CR3000). The File Retrieval tab is located in the Setup
Screen as part of the datalogger configuration. Once configured, the file
retrieval software is used to retrieve images and video from a datalogger.
FIGURE 17-1. File Retrieval Setup Screen
Select the required Retrieval Mode for the application. The use of the “Follow
Scheduled Data Collection” option will use the scheduled configured in the
Schedule tab. If the “New Schedule” option is selected you will need to
configure the Base Date and Time, and the Retrieval Interval parameters.
It is possible to configure File Retrieval to delete files once retrieved from the
datalogger. If datalogger memory capacity is a concern, it is recommended to
use this feature.
To add a file retrieval process, start by clicking “Add New” under File Pattern.
Once added the Edit File Pattern, Output Directory, and Max Files parameter
become available to fill out. Each File Pattern added will need to be
individually configured.
Under the Edit File Pattern parameter you must select from the directory
location options, in order to specify the image or video to be retrieved. By
File Retrieval
Setup Screen