Campbell Scientific CC5MPX and CC5MPXWD Digital Network Cameras - Manual (Page 47)

Section 7. Camera Operation Using Web Browser Interface
7-11
7.3.1 System Date and Time
The Date and Time sub menu (see FIGURE 7-11) provides a means for
viewing and setting the current Date and Time of the camera. The available
options include:
• Setting the Time Manually
To set the date and time manually select the Set Manually button and then
select the date and time values from the drop down boxes. You must click
on the Submit button for the settings to take effect.
• Synchronize with Computer Time
The web page also displays the time reported by your computer. If this is
the desired time, simply select the button and click on the Submit button.
The camera time will be updated with the computer time.
• Synchronize with SNTP Server
If an appropriate SNTP Time server is set up in the Network Settings, then
this button can be selected to use an Internet SNTP time server. Clicking
on the Submit button will start the process.
FIGURE 7-11. Date and Time Settings