Campbell Scientific CC5MPX and CC5MPXWD Digital Network Cameras - Manual (Page 71)

Section 7. Camera Operation Using Web Browser Interface
7-35
Video Capture
• Yes
• No
Select Yes to include Video capturing.
Video Settings
• Settings #1
• Settings #2
One of two video settings can be used for the video capture.
Duration In
Seconds
0 to 60 The length of time the video is recorded for.
Capture To
Memory Card • CARD
• No
Selecting CARD will enable the video taken to be stored to the
memory card.
Maximum
Memory Size
0 to 65535
This is the allowable space on the memory card that will be reserved
for videos taken by this External Trigger Capture. The value is in
Megabytes. A value of 1000 will reserve 1000 Mbytes. A value of 0
will have the camera automatically allocate the memory.
Management
Type Options • Fill and Stop
• Ring Memory
There are 2 methods of managing files on the memory card:
• Fill and Stop will stop recording additional video once the memory
card is full or the allocated memory size is reached.
• Ring Memory management will start deleting the oldest files once
the memory card is full or the allocated memory size is reached.
Main Folder
Name
Read Only Field
This is a read only field. The Name of the Main Folder where the still
image files will be stored (ExternTrig1Video).
Sub Folder
Options
• Year_Month_
Day_Taken
• Year_Month_
Taken
An option is given to store Videos in a subfolder named by
Year_Month or Year_Month_Day. Selecting the Year_Month_Day
option will have some performance advantages when a large number of
Videos are taken. Reducing the number of files in a folder will speed
up the storing and file management process. Speed advantages are
only noticeable if the number of files in the Year_Month folder will
exceed 1000. If speed is not an issue, then user preference is fine.
Send via email
• Disabled
• EMAIL
Settings#1
• EMAIL
Settings#2
Selecting one of the EMAIL Settings will enable the camera to
transmit the video files via EMAIL. The selected EMAIL Settings
should be properly configured before using the option.
Send via FTP
• Disabled
• FTP Settings#1
• FTP Settings#2
Selecting one of the FTP Settings will enable the camera to transmit
the video files to an FTP Server. The selected FTP Settings should be
properly configured before using the option.
Send via PakBus
• Disabled
• Enabled
Used to enable the video files to be sent to a PakBus compatible
device. The PakBus settings should be properly configured in the
Communications Page before enabling this option.
7.6.5 Motion Detection
The Motion Detection sub tab (see FIGURE 7-31) is used to configure the
camera to capture still images or video by using the Motion Detection
capability of the camera.
Even if this feature is enabled, the motion detection will only operate when the
camera is in the Fully On Power state.