Table 7-11. still image settings -41 – Campbell Scientific CC5MPX and CC5MPXWD Digital Network Cameras User Manual

Page 77

Advertising
background image

Section 7. Camera Operation Using Web Browser Interface

7-41

TABLE 7-11. Still Image Settings

Variable Allowable

Values

Description

Resolution

• 320x176

• 320x240

• 640x352

• 640x480

• 1280x720

• 1280x960

• 2592x1944

The resolution option is the resolution of the Still Image in pixels
(Width x Height).

Banner Position

• OFF

• Inside Top

• Inside Bottom

• Outside Top

• Outside Bottom

Selecting the Inside banner will display the text within the image area
either at the top or the bottom.

The Outside banner is a text bar placed above or below the still
image. The vertical height of the picture is increased to accommodate
the outside banner. See TABLE 7-12 for the image sizes with outside
banners.

Name on Image
Banner

• NO

• YES + Text

By selecting Yes a custom name can be placed on the Image Banner.
See TABLE 7-12 for the number of characters that can fit on a
specific image resolution size. The Actual Text field can hold 255
characters

Include
Timestamp in
Banner

• NONE

• YYYY/MM/D

D/HH/MM/SS

A Time stamp can be placed on the banner. The time stamp will
occupy 20 characters and the format is as follows:
YYYY/MM/DD HH:MM:SS
2011/01/30 14:54:07

Include Serial
Number and
Temperature in
Banner

• NO

• YES

By selecting YES the internal camera temperature and the Serial
number of the camera will be placed on the Right hand side of the
banner. The temperature is in degrees Celsius and the format is as
follows:
±TT.T C / SSSS
+25.0 C / 1000

Default File Name Text Field

This text field allows a file name to be used for the still images
produced. The text is limited to 32 characters.

Count Type

• NONE

• Date and Time

• Number

Increment

• The NONE option will use the same file name for all pictures.

Only one image name will appear in a directory or be transmitted
out (EMAIL, FTP or PakBus).

• The Date and Time option will append a Time stamp to the file

name. The text entered in the above parameter (Default File
Name) will be followed by the date and time:

< Default File Name >_YYYY_MM_DD_HH_MM_SS.jpg

• The Number Increment option will append a 10 digit counter to

the file name. The files will be named with the following format
after the Default File Name text:

< Default File Name >_XXXXXXXXXX.jpg

JPG Compression
Level

• NONE/Lossless

• Low

• Med

• High

• Very High

The None/Lossless compression level produces the largest JPEG files
sizes with no loss of information. The Very High compression level
produces the smallest file sizes but there will be noticeable distortions
in the picture due to the compression. See TABLE 7-12 for typical
file size information.

Advertising