Campbell Scientific CC5MPX and CC5MPXWD Digital Network Cameras - Manual (Page 73)

Section 7. Camera Operation Using Web Browser Interface
7-37
TABLE 7-9. Motion Detection Settings
Variable Allowable Values Description
Sensitivity Level 1 to 99
The best method for determining where to set the level for your needs
is to experiment with the values. The Value of 1 is the least sensitive
value but less prone to false triggers. The value of 99 is the most
sensitive value and is most susceptible to false triggers.
You do not need to enable the motion detection to test its functionality.
Simply set this parameter and observe the Motion Detect Status in the
Live Video page.
Motion Detection
Enable • Enable
• Disable
Enables or Disables Motion Detection Captures.
Start Minutes 0 to 1439
Start time in minutes relative to Midnight. The Motion Detection can
be set to be active for a certain time period only. See TABLE 7-6 for
more details.
Stop Minutes 0 to 1439
Stop time in minutes relative to Midnight. The Motion Detection can
be set to be active for a certain time period only. See TABLE 7-6 for
more details.
Still Image
Capture • Yes
• No
Select Yes to include still image captures.
Number of
Images
1 to 60
Determines how many still images will be taken when the Motion
Detection is activated.
Image Interval 1 to 60
If the Number of Images (above parameter) is greater than 1. Then this
parameter is the time spacing between images.
Capture To
Memory Card • CARD
• No
Selecting CARD will enable the still images taken to be stored to the
memory card.
Maximum
Memory Size
0 to 65535
This is the allowable space on the memory card that will be reserved
for Still Images taken by the Motion Detection capture. The value is in
Megabytes. A value of 1000 will reserve 1000 Mbytes. A value of 0
will have the camera automatically allocate the memory.
Management
Type Options • Fill and Stop
• Ring Memory
There are 2 methods of managing files on the memory card:
• Fill and Stop will stop recording additional images once the
memory card is full or the allocated memory size is reached.
• Ring Memory management will start deleting the oldest files once
the memory card is full or the allocated memory size is reached.
Still Image
Settings • Settings #1
• Settings #2
Still Images for the External Trigger Capture can use 1 of 2 settings.
Settings #1 and Settings #2 can be setup with various banner,
resolution and compression values.
Main Folder
Name
Read Only Field
This is a read only field. The Name of the Main Folder where the still
image files will be stored (MotionDetectStill).
Sub Folder
Options
• Year_Month_
Day_Taken
• Year_Month_
Taken
An option is given to store images in a subfolder named by
Year_Month or Year_Month_Day. Selecting the Year_Month_Day
option will have some performance advantages when a large number of
images are taken. Reducing the number of files in a folder will speed
up the storing and file management process. Speed advantages are
only noticeable if the number of files in the Year_Month folder will
exceed 1000.
Send via email
• Disabled
• EMAIL
Settings#1
• EMAIL
Settings#2
Selecting one of the EMAIL Settings will enable the camera to
transmit the still images via EMAIL. The selected EMAIL Settings
should be properly configured before using the option.