Sony HAP-S1 - Manual (Page 100)

11. Select either [Auto] or [Custom] on the selection screen for the IP address setup method.
12. Follow the instructions that appear in the display to set up the connection.
Note
You can enter a maximum of 32 alphanumeric characters and/or symbols for a network name (SSID).
If the security mode of your wireless LAN router/access point is not included in the options in step 9,
change the security configuration of the router.
You can enter 5, 13 or 26 alphanumeric characters and/or symbols for a WEP key or 8 to 63
alphanumeric characters and/or symbols for a WPA key.
Related Topic
How to input characters
Method 2. Setting up a network connection by selecting an access point
Notes on use
4-472-853-11(1)
Copyright 2013 Sony Corporation
100