Sony HAP-S1 - Manual (Page 24)

HDD AUDIO PLAYER
HAP-S1
Preparations
What you need to do before starting to use the HDD AUDIO PLAYER
Explains what you need to do to listen to music after you purchase the HDD AUDIO PLAYER.
Prep 1. Connecting speakers
Explains how to connect speakers to the SPEAKERS terminals on the rear panel of the HDD AUDIO PLAYER.
Prep 2. Connecting to a network with a LAN cable (only when using a wired LAN)
Explains how to connect the HDD AUDIO PLAYER to the same network as your computer using a wired LAN.
Prep 3. Turning on the HDD AUDIO PLAYER
Explains the procedures for connecting the supplied AC power cord (mains lead) and then turning on the HDD
AUDIO PLAYER after making connections with all other devices.
Prep 4. Configuring the initial settings of the HDD AUDIO PLAYER
Explains the initial settings process. When the HDD AUDIO PLAYER is turned on for the first time, it
automatically enters the initial settings mode.
Prep 5. Configuring the settings of a computer to use HAP Music Transfer
Explains the process to save music files managed on your computer to the hard disk drive of the HDD AUDIO
PLAYER using HAP Music Transfer.
Operating the HDD AUDIO PLAYER from your smartphone or tablet (using HDD Audio Remote)
Install the HDD Audio Remote application to operate the HDD AUDIO PLAYER from your smartphone or tablet.
This topic provides information about the download site of the HDD Audio Remote.
System requirements for computers connected to the HDD AUDIO PLAYER
Explains the system environment required for computers to use HAP Music Transfer, an application that
transfers audio files from your computer to the HDD AUDIO PLAYER.
Supplied accessories
Provides a list of the accessories included with the HDD AUDIO PLAYER.
Help Guide
How to Use
24