Sony HAP-S1 - Manual (Page 68)

HDD AUDIO PLAYER
HAP-S1
Prep 1. Connecting speakers
First, you need to connect speakers to the HDD AUDIO PLAYER.
Note
Make sure that the AC power cord (mains lead) of the HDD AUDIO PLAYER is unplugged when
connecting any other cord.
Connect speakers to the SPEAKERS terminals on the rear panel of the HDD AUDIO PLAYER as shown in
the illustration below.
: SPEAKERS terminals of the HDD AUDIO PLAYER
: Speaker cords (not supplied)
: Speaker (R)
: Speaker (L)
Note
The HDD AUDIO PLAYER is equipped with a built-in antenna for wireless LAN. Make sure to keep a
distance between the HDD AUDIO PLAYER and speakers or other devices to maintain good wireless
communication.
Notes on use
4-472-853-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
68