Sony HAP-S1 - Manual (Page 90)

HDD AUDIO PLAYER
HAP-S1
Connecting the HDD AUDIO PLAYER to a network automatically
This topic explains how to connect the HDD AUDIO PLAYER to a wired network by obtaining an IP
address automatically.
As the HDD AUDIO PLAYER can obtain an IP address automatically, you do not have to make complicated
connection configurations. You can connect the HDD AUDIO PLAYER to a network simply by connecting
the LAN cable (supplied).
1. Select [Settings] - [Network Settings] - [Internet Settings] from the Home screen.
2. Select [Wired Setup].
A selection screen for the connection method appears.
3. Select [Auto].
A network setting configuration screen appears.
4. Select [Next].
A confirmation message for the LAN cable connection appears.
5. Select [Save & Connect].
The HDD AUDIO PLAYER starts connecting to the network.
6. When the network connection is completed, confirm the message about the wired LAN and Internet
access on the screen and then select [OK].
Notes on use
4-472-853-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
90