Help guide – Sony HAP-S1 User Manual
Page 101
HDD AUDIO PLAYER
HAP-S1
Method 4. Setting up a network connection using the (WPS) PIN code configuration method
You can set up a connection by entering the (WPS) PIN (Personal Identification Number) code of the HDD
AUDIO PLAYER into the wireless LAN router/access point to authenticate the connection between the
devices.
1. Select [Settings] - [Network Settings] - [Internet Settings].
2. Select [Wireless Setup].
3. Select [Select access point].
The HDD AUDIO PLAYER starts searching for the available access point.
4. When the list of available network names (SSID) is displayed, select [Add a new access point].
5. Select [(WPS) PIN Method].
The (WPS) PIN code for the HDD AUDIO PLAYER appears.
6. Enter the (WPS) PIN code of HDD AUDIO PLAYER into the wireless LAN router/access point.
For details on entering the (WPS) PIN code, refer to the operating manual of your wireless LAN
router/access point.
7. When you have finished entering the (WPS) PIN code, select [Start] on the HDD AUDIO PLAYER.
The HDD AUDIO PLAYER and wireless LAN router/access point start authenticating the connection
with each other.
When the certification is completed, a confirmation screen of the network name (SSID) and security
key (WEP/WPA) appears.
8. Select [Next] on the confirmation screen.
9. When the setup is completed, select [OK] on the screen.
Note
You cannot cancel the connection after the HDD AUDIO PLAYER has started connecting to the network.
Do not turn the power off while the HDD AUDIO PLAYER is connecting to the network.
How to Use
101