Sony HAP-S1 - Manual (Page 151)

HDD AUDIO PLAYER
HAP-S1
Setting the Sleep timer (Sleep)
You can set the Sleep timer. When the specific time you set has elapsed, the HDD AUDIO PLAYER is
automatically turned off.
1. Select [Settings] - [System Settings].
2. Select [Sleep].
3. Set the specific time until the Sleep timer function activates from [Off] (factory default setting),
[00:30], [01:00], [01:30] or [02:00].
Note
The Auto Standby function that automatically turns the HDD AUDIO PLAYER off does not work after
you set the Sleep timer.
If the HDD AUDIO PLAYER is set to Network Standby mode, you can operate it through HDD Audio
Remote even after the HDD AUDIO PLAYER has been turned off after the specific time you set has
elapsed.
The Sleep timer is canceled if one of the following operations is performed after setting the Sleep
timer:
A software update is started.
Formatting of the hard disk drive is started.
Rescanning of the hard disk drive is started.
The HDD AUDIO PLAYER is manually turned off.
The product is reset. (The factory reset function is performed.)
The Sleep timer is set to off.
Hint
When the remaining time until the sleep timer activates is less than 60 seconds, the remaining time is
shown on the screen.
Notes on use
4-472-853-11(1)
Copyright 2013 Sony Corporation
Help Guide
How to Use
151