No sound is output or sound is interrupted, Help guide – Sony HAP-S1 User Manual

Page 197

Advertising

HDD AUDIO PLAYER

HAP-S1

No sound is output or sound is interrupted.

Check that the speakers are connected to the HDD AUDIO PLAYER correctly.
Press MUTING on the remote control to cancel the muting function.
Check that headphones are not connected. If headphones are connected, sound is not output from the
speakers.
Check that the correct input jack(s) are being used.
Check that the cord(s) are connected to the correct input jack(s) on the selected equipment.
Check that both the HDD AUDIO PLAYER and the connected equipment are turned on.
Sound may be interrupted when the sampling frequency or audio format is changed.
Only 2ch tracks are supported in any of the playable file formats. Tracks other than 2ch tracks cannot
be played.
DRM (Digital Rights Management)-protected music files cannot be played.
Confirm the audio file formats that can be played.
If the HDD AUDIO PLAYER is being used with a television, speakers, video deck or tape deck and is
placed too close to that equipment, noise may result.
Audio formats other than LPCM 2ch cannot be played through the OPTICAL IN or COAXIAL IN jacks.
The HDD AUDIO PLAYER does not output a signal through the D/A DIRECT·LINE OUT jacks when [LINE
IN 1] or [LINE IN 2] is selected in the [External Input] menu.
If you are using an external hard disk drive, skipping may occur in the playback sound depending on
the hard disk performance.
The HDD AUDIO PLAYER receives transferred files and analyzes music files at the same time. Start
playback after the

icon disappears from the display.