Setting the auto standby function (auto standby), Help guide – Sony HAP-S1 User Manual

Page 149

Advertising

HDD AUDIO PLAYER

HAP-S1

Setting the Auto Standby function (Auto Standby)

If you set the Auto Standby function to [On], if you do not operate the HDD AUDIO PLAYER and do not
play tracks for approximately 20 minutes, the unit is automatically turned off and enters standby mode
to reduce the power consumption.

1. Select [Settings] - [System Settings].

2. Select [Auto Standby].

3. Select [On] (factory default setting).

Note

The Auto Standby function does not work during the following processes:

Updating the software
Formatting the hard disk drive
Rescanning a hard disk drive
Resetting the product (performing the Factory Reset function)
When the Sleep timer is working
Transferring music files from a computer
Playing music via external input

Hint

When the remaining time until the HDD AUDIO PLAYER enters the standby mode is less than 60
seconds, the remaining time is shown on the screen.
When the HDD AUDIO PLAYER is in standby mode, you can start the HDD AUDIO PLAYER by pressing
the

button or

button on the remote control or the HDD AUDIO PLAYER, or by operating HDD

Audio Remote (only when the HDD AUDIO PLAYER is in Network Standby mode).