Required network environment, Help guide – Sony HAP-S1 User Manual
Page 62
HDD AUDIO PLAYER
HAP-S1
Required network environment
You can transfer audio files from your computer to the HDD AUDIO PLAYER by connecting both to the
same network, either by a wired or wireless connection.
Confirm the supported environment described below.
Note
You need to connect the HDD AUDIO PLAYER to a network that can access the Internet if you want to
listen to Internet radio programs.
Wired LAN (using a LAN cable)
LAN (10/100/1000) port:
1000BASE-T/100BASE-TX/10BASE-T
(The network speed may differ depending on the network environment.)
LAN cable:
We recommend using a LAN cable that is Cat5 or higher. A normal-type cable is also recommended, as
some flat-type LAN cables are easily affected by noise.
If the receiver is used in an environment with power supply noise from electronic devices or in a noisy
network environment, use a shielded-type LAN cable.
Wi-Fi (using a wireless LAN network)
Compatible standards:
IEEE 802.11 b/g/n
Security mode:
None
WEP
WPA/WPA2-PSK (AES)
WPA/WPA2-PSK (TKIP)
Radio frequency:
2.4 GHz
Note
Wi-Fi devices work on the 2.4 GHz band, which is used by a variety of devices. Wi-Fi devices use
technology to minimize radio interference from other devices that use the same band. However, radio
interference may still cause slower data transfer rates, reduce the communication range, or cause
How to Use
62