Updating the software (network update), Help guide – Sony HAP-S1 User Manual

Page 157

Advertising

HDD AUDIO PLAYER

HAP-S1

Updating the software (Network Update)

You can update the software of the HDD AUDIO PLAYER.
To perform the Network Update function, be sure that the HDD AUDIO PLAYER is connected to the
Internet.

1. Select [Settings] - [Network Update] in the Home screen.

If a newer version of the software is found, a software update notification screen appears.

2. Confirm the current version of the software and the new version of the software, and then select

[OK].
The HDD AUDIO PLAYER connects to the network and starts downloading the new version of the
software.
Installation will start automatically after downloading is complete.
You can confirm the progress status on the screen.
After the software update is complete, the HDD AUDIO PLAYER restarts automatically.

Note

Do not turn the HDD AUDIO PLAYER off or disconnect the LAN cable during the software update. This
may cause a malfunction.
Select [Cancel] to cancel the software update while downloading the software.
If the software update fails, an update error screen appears and the HDD AUDIO PLAYER may restart.
If you update the software during playback, the playback stops.