Sony HAP-S1 - Manual (Page 37)

HDD AUDIO PLAYER
HAP-S1
System Settings
Selecting the language to be displayed on the screen (Language)
Explains how to configure the language to be displayed on the screen.
Controlling the brightness (Brightness)
Explains how to change the brightness of the screen. You can adjust the brightness of the screen to suit the
brightness of your surroundings by selecting from five levels.
Setting the Network Standby function (Network Standby)
Explains how to configure the setting to start the Network Standby function (allowing you to operate the HDD
AUDIO PLAYER via the network).
Setting the Auto Standby function (Auto Standby)
Explains how to configure the Auto Standby setting. If you do not operate the HDD AUDIO PLAYER for a
specific period of time, the unit is automatically turned off.
Setting the Sleep timer (Sleep)
Explains how to set the Sleep timer.
Receiving notifications about software updates (Software Update Notification)
Explains how to enable the software update notification function.
Displaying the current system information (System Information)
Explains how to display the current system information of the HDD AUDIO PLAYER.
Displaying the software license (Software License)
Explains how to display the software license of the HDD AUDIO PLAYER.
Resetting to the factory default (Factory Reset)
Explains how to reset the HDD AUDIO PLAYER to the factory default settings.
Help Guide
How to Use
37