Sony DCR-IP1 - Manual (Page 21)

Recording
Re
cord
ing
21
Recording
Recording movies
You can record movies on a tape or a
“Memory Stick Duo.”
Before recording, follow steps 1 to 7 in
“Getting started”(p. 12 - p. 20).
When you are recording on a tape, movies
will be recorded along with stereo sound.
When you are recording on a “Memory Stick
Duo,” the movie will be recorded with
monaural sound.
1
Open the LCD panel.
2
Select the recording mode.
To record on a tape
Slide the POWER switch until the
CAMERA-TAPE lamp lights up. The lens
cover opens, and your camcorder is set to
the standby mode.
To record on a “Memory Stick
Duo” — MPEG MOVIE AX
Slide the POWER switch repeatedly until
the CAMERA-MEM lamp lights up. The
lens cover opens, and the currently selected
recording folder appears on the screen.
3
Press START/STOP.
Recording starts. [REC] appears on the
LCD screen and the Camera recording lamp
lights up.
Press START/STOP. Recording stops.
To check the last recorded MPEG movie
— Review
Touch . Playback automatically starts.
Touch to return to the standby mode.
To delete a movie, touch after playback is
finished, then touch [YES].
To cancel the operation, touch [NO].
To turn the power off
Slide the POWER switch up to (CHG)OFF.
Indicators displayed during recording
on a tape
The indicators will not be recorded on the tape.
Date/time and camera settings data (p. 43) will
not be displayed during recording.
A Remaining battery time
The indicated time may not be correct
depending on the environment of use.
When you opened or closed the LCD panel,
it takes about 1 minute to display the correct
remaining battery time.
POWER
switch
START/
STOP
Camera recording lamp
Slide the POWER switch down
while pressing the green button.
Slide the POWER switch down
while pressing the green button.
0:00:00
60min
REC
P-MENU
60 min
1 2 3
7
4
5
6
, continued