Quick start guide, Recording movies on a tape – Sony DCR-IP1 User Manual

Page 8

Advertising
background image

Quick Start Guide

8

Quick Start Guide

Recording movies on a tape

1

Attach the charged battery pack to the camcorder.

To charge the battery, see page 13.

2

Insert a cassette into the camcorder.

a

Slide the BATT

(battery release)

lever in the direction of the arrow as
shown in the illustration and remove
the battery terminal cover.

b

Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.

a

Slide the

lever in the direction of
the arrow, then open
the cassette lid.

The cassette compartment
comes out automatically.

b

Insert the cassette with
the window-side facing
the cassette lid, then
push the center of the
back of the cassette
lightly.

c

Lightly push the
cassette compartment
in with the cassette lid.

Close the cassette lid after
the cassette compartment
slides back in by itself.

BATT

(battery release) lever

OPEN/EJECT

lever

OPEN/EJECT

Window-side

Advertising