Goulds Pumps 3180-86 - IOM - Manual (Page 118)

Parts Listings and Cross-sectional
Drawings
Parts list
Second-generation spring-mounted baseplate
Refer to the Serial Number Record for the correct part numbers and quantity of each component.
Item Part name Material code
91786 352 Stud 1.25 in.–22 in. C.S. 2210
91786 352 Stud 1.25 in.–22 in. G.S. 6951
91786 350 Stud 1.25 in.–16 in. C.S. 2210
91786 350 Stud 1.25 in.–16 in. G.S. 6951
49507 15 Nut, hex 1.25 in. C.S. 2210
49507 15 Nut, hex 1.25 in. G.S. 6951
49507 65 Jam nut, hex 1.25 in. C.S. 2210
49507 65 Jam nut, hex 1.25 in. G.S. 6951
49519 13 Washer, plain 1.25 in. C.S. 2210
49519 13 Washer, plain 1.25 in. G.S. —
A07321A Spring, 885 lb/in. steel —
A08078A Spring, 176 lb/in. steel —
A07314A Spring, 885 lb/in. PVC coated —
A08077A Spring, 176 lb/in. PVC coated —
A07313A Follower, spring C.S. 3201
A07313A Follower, spring G.S. 3211
076309 Bearing assembly pad —
Notes for parts tables 7-10
The note references in the table columns refer to the following:
1. Dependent on pump or frame size
2. Packed box = 2; Mechanical seal = 4
3. One plug for a lantern ring connection is standard.
Optional connections require one extra plug for a packed box cover and three extra plugs for a
dynamic seal cover.
4. Shearpeller TM is available only in Duplex 2205 (Code 3265).
5. There is no impeller wear ring on the XL1, XL2-S, and XL2 sizes.
6. The dynamic seal option is not available on the XL1, XL2-S, and XL2 sizes.
7. The Shearpeller
™ option is not available on the XL1, XL2-S, and XL2 sizes.
8. The open impeller option is not available on the XL1, XL2-S, and XL2 sizes.
9. The grease lubrication option is not available on the XL1, XL2-S, and XL2 sizes.
10. The casing wear rings are not mounted with setscrews on the XL1, XL2-S, and XL2 sizes.
11. Casing lugs are not required on the XL1, XL2-S, and XL2 sizes.
Table 7: Parts list for 3180 and 3185 S, M, L, and XL groups (stainless steel or iron with stainless steel trim)
Item Quantity Part name AI/316 SS trim All 316 SS 316L SS 317 SS 317L SS
100 1 Casing 1000 1203 1219 1209 1225
Parts Listings and Cross-sectional Drawings
116 Models 3180, 3181, 3185, and 3186 Installation, Operation, and Maintenance Manual