Goulds Pumps 3180-86 - IOM - Manual (Page 52)

Oil volumes
Oil volume requirements
This table shows the required amount of oil for oil-lubricated bearings.
Frame Quarts Liters
S 1.1 1.0
M 2.1 2.0
L 2.1 2.0
XL 3.2 3.0
XL1 12.2 11.6
XL2-S and XL2 24.0 22.7
Lubricating oil requirements
Quality requirements
Use a high quality turbine oil with rust and oxidation inhibitors.
Lubricating oil requirements
Bearing temperature below
180°F (82°C)
Bearing temperature above
180°F (82°C)
ISO grade ISO viscosity grade 68 ISO viscosity grade 100
Approximate SSU at 100°F (38°C) 300 470
DIN 51517 C68 C100
Kinematic viscosity at 105°F
(40°C) mm 2 /sec
68 100
Acceptable oil for lubricating bearings
Acceptable lubricants
Brand Lubricant type
Chevron GTS Oil 68
Exxon Teresstic EP 68
Mobil DTE 26 300 SSU @ 100°F (38°C)
Philips Mangus Oil 315
MM motor oil SAE 20-20W
HDS motor oil SAE 20-20W
Gulf Harmony 68
Lubricate the bearings with oil
WARNING:
Make sure to properly lubricate the bearings. Failure to do so can result in excess heat generation, sparks,
and premature failure.
• Fill the bearing frame with oil:
Commissioning, Startup, Operation, and Shutdown
50 Models 3180, 3181, 3185, and 3186 Installation, Operation, and Maintenance Manual