Goulds Pumps 3180-86 - IOM - Manual (Page 94)

228 370B
108
Assemble the TaperBore PLUS ™ seal chamber
1. Apply a liberal amount of an anti-galling compound, such as Loctite Nickel Anti-seize, to the shaft
sleeve (126) bore and shaft (122).
2. Slide the sleeve onto the shaft.
3. Install the cartridge seal on the sleeve.
4. Use an eye bolt, strap, and sling as required.
5. Install the seal chamber (184):
If your pump
group is...
Then...
S, M, L, and XL Install the seal chamber (184) and hex head bolts (370B) on the bearing frame (228).
Maintenance
92 Models 3180, 3181, 3185, and 3186 Installation, Operation, and Maintenance Manual