6 user interfaces, 1 enable input, User interfaces – Festo Контроллер двигателя SEC-ST User Manual
Page 28: Enable input
Advertising
1. System summary
1−6
Festo SEC−ST−48−6−P01−EN en 0606c
1.6
User interfaces
1.6.1
Enable input
The controller is enabled via the Enable input.
Control
(e.g. SPC200)
SEC−ST−48−6−P01
Optocoupler energized = SEC enabled
Fig. 1/1:
Please note
An incorrect connection may cause damage to the SEC−ST
or to the higher−order control.
·
Please note the output levels of your higher−order conĆ
trol.
+24ĂV
or +5ĂV can be used as signal level.
Advertising