2 plug x1 for control cable, 3 plug x2 for motor connection mtr-st, 4 plug x3 for power supply – Festo Контроллер двигателя SEC-ST User Manual
Page 46: 5 pe connection of the sec-st, Plug x1 for control cable, Plug x2 for motor connection mtr−st, Plug x3 for power supply, Pe connection of the sec−st
Advertising
3. Installation
3−4
Festo SEC−ST−48−6−P01−EN en 0606c
3.1.2
Plug X1 for control cable
1 plug connector, 11−pin from Weidmüller, BLZ 3.5/11 SN SW,
order no. 161572, included in delivery.
3.1.3
Plug X2 for motor connection MTR−ST...
1 plug connector, 4−pin from Weidmüller, BLZ 5.00/4 SN SW,
order no. 159608, included in delivery.
3.1.4
Plug X3 for power supply
1 plug connector, 2−pin from Weidmüller, BLZ 5.00/2 SN SW,
order no. 162516, included in delivery.
3.1.5
PE connection of the SEC−ST
The PE connection of the SEC−ST (mains and motor side) is
made via an M4 threaded bolt.
Advertising