Festo Контроллер двигателя SEC-ST User Manual
Page 33
Advertising
1. System summary
1−11
Festo SEC−ST−48−6−P01−EN en 0606c
Step designation
Number of steps per revolution
1/1 step
200
1/2 step
400
1/4 step
800
1/5 step
1000
1/8 step
1600
1/10 step
2000
1/32 step
6400
With a PLC from Festo (SPC200):
If actuation is made with a PLC from Festo (SPC200), only 1/1,
1/2, 1/4, 1/5, 1/8 and 1/10 of a step will be supported.
Please note
If 1/32 of a step is used, this will result in other positioning
paths.
Advertising