Festo Quickstepper FSS - Manual (Page 29)

Quickstepper
Festo FSS−12−C 0410a English
29
8 Operation
Setup and step mode are set using the button Man.Step and the selector switch
Output.
Please note
The selector switch Output must be pressed while moving between the
positions 0 and 1.
8.1 Setup mode
1. Push the selector switch Output into the position 0 (output switched off ).
2. Select the step you want using the button Man.Step.
3. Move the selector switch Output into the position 1. The relevant output is
enabled and the command is executed when the switch is in position 1.
Please note
The output links provided are transferred and are effective.
8.2 Step mode
1. Push the selector switch Output into the position 1 (output activated).
2. Type through the outputs consecutively using the button Man.Step.
The movement sequence that you want is processed step by step.
Typing is continued with the same feedback signals that also ensure a
performance−related, secure work sequence in automatic mode.
Please note
In order to begin the first step, all the starting conditions ć as in automatic
mode ć must be present (chapter 7).