Konica Minolta KIP 7000 - Manual (Page 153)

Section 5 AutoCAD Driver 5-15
5.3 Media Options
5.3.1
Type
This drop down list has the listed media types that may be installed in the KIP
printer. They include Bond, Vellum and Film. Please note the Status region
to confirm the media currently installed. If media selected for a print is not
currently installed, the printer will “hold the job” and wait for the media type to
be satisfied prior printing the job.
5.3.2
Fold
Folds the print according to the fold patterns configured on the KIP IPS.
Please note that the optional folder must be installed for this action to occur.
5.3.3 Save Paper
If the media size selected is larger than the image size, this button will
prevent excess media (waste) from being consumed in the print process. This
occurs in the length of the print. This does not affect image output.
Note: If the Printer is set to “Closest,” the nearest roll width installed will be
used to even further reduce media waste (more than one roll width must be
installed of the same media type).
5.3.4
Header
A text header can be placed on the paper for print identification. The
information placed in the Plot Identification will be printed on the print