Konica Minolta KIP 7000 - Manual (Page 18)

Section 1 Basic Printer Functions 1-12
Name of part Function
Status Indicator
OFF : Power is not supplied.
Lighting Orange : Warming up/printing is prohibited.
Flashing Orange : Sleep Mode
Flashing Green : Temperature Recovering Mode
(Printing is temporarily interrupted to recover
the temperature of Fuser Unit.)
Lighting Green : Ready/Printing
Toner Remaining
Indicator Toner Remaining Volume is indicated green with every 1/4 step.
: Toner remains more than 3/4.
: Toner remains more than 2/4.
: Toner remains more than 1/4.
: Toner remains less than 1/4.
Paper Mis-feed Indicator Paper Mis-feed Indicator lights red when the printer or optional
device fails to feed the media.
A mis-feed code is indicated on the Display if this occurs.
Job Indicator Job Indicator lights green when the printer receives a print job from
the scanner or controller.
Roll Empty Indicator Roll Empty Indicator lights red when the roll media in the selected
Roll Deck is empty.
It also lights when the roll media is not correctly installed.
Display The Display normally shows green which Roll Deck is selected and
the width of the roll media in said Roll Deck.
It also indicates an error code if the printer has an error such as
“paper mis-feed” or “door open”.
Image Density Indicator Image Density is indicated green with every 1/4 step.
(Strobe time is adjusted.)
: Darker
: Normal
: Lighter
: Lightest
Density Selection Key You may change the density level by pressing the Density Selection
Key.
Toner Low Indicator Toner Low Indicator lights red when there is not enough toner in the
Developer Unit.
Menu Key Menu selection ( User Mode )
Test Print Switch A test pattern will be printed out if you press the Test Print Switch.
(Service purpose only.)
Enter Key Selected job is defined. (User Mode)
* (Asterisk) Key Function selection ( User Mode )
(Right Arrow) Key Mode selection (Increment) ( User Mode )
(Left Arrow) Key Mode selection (Decrement) ( User Mode )
Green Orange