Konica Minolta KIP 7000 - Manual (Page 225)

7-13 Section 7 KIP Print Net
4.0 Host PC Configuration
This section of the document explains how to setup certain user settings for use inside of
KIP PrintNET. This section requires advanced knowledge of KIP Request software and its
configuration settings on the host system as defined by Winreq.ini. Changes made in
Winreq.ini on the host PC are reflected in KIP PrintNET.
From the main screen, our main focus will be on the following features:
a) Requester, Job Number, and Description
To edit, open Winreq.ini on the Host PC and scroll to the following lines:
Prompt=Job Number:
RequesterPrompt=Requester:
DescriptionPrompt=Description
:
Requester Job Number and Description fields can be edited to match user
requirements. An example is shown below:
Prompt= Project Code:
RequesterPrompt= Operator:
DescriptionPrompt= Notes:
Please refer to KIP User Guide for KIP Request software for more information
b) Pen table
Available pen table files are created and defined within KIP Request. KIP PrintNET
software will use pen tables defined in KIP Request.*
Please refer to KIP User Guide for KIP Request software for more information on
pen table setup