Konica Minolta KIP 7000 - Manual (Page 19)

Section 1 Basic Printer Functions 1-13
Name of part Functiom
Toner Low Indicator Lights when toner is required.
Roll Empty Indicator Lights when the roll media in the selected Roll Deck is empty. It can
also light when the media is not correctly installed.
Paper Mis-feed Indicator Lights when the printer or optional device fails to feed the media. A
mis-feed code is indicated on the Display if this occurs.
Job Indicator Lights when the printer receives a job
Ready Indicator OFF : Power is off.
Lighting RED : Warming up / Printing is prohibited.
Flashing RED : The printer is in the Warm Sleep Mode.
(Quick Flash) (For Information on Warm Sleep Mode, refer to
pages 3-11 to 3-12.)
Flashing RED : The printer is in the Cold Sleep Mode.
(Normal Flash) (For Information on Cold Sleep Mode, refer to
pages 3-9 to 3-10.)
Lighting GREEN : Ready / Printing.
Flashing GREEN : Temperature Recovering Mode
(Printing is temporarily interrupted to recover the
temperature of Fuser Unit.)
Display It indicates the selected Roll Deck and the width of the roll media in
the selected Roll Deck. It also indicates an error code if the printer
has an error such as “paper mis-feed” or “door open”.
Toner Remaining
Indicator Toner Remaining Quantity is indicated in 1/4 steps.
: Toner remains more than 3/4.
: Toner remains more than 2/4.
: Toner remains more than 1/4.
: Toner remains less than 1/4.
Image Density Indicator Image Density is indicated in 1/4 steps.
: : Darker
: Normal
: Lighter
: Lightest
Density Selection Key You may change the density level by pressing the Density Selection
Key. (please also see the Touchscreen “?” “Configuration”)
Test Print Switch A test pattern will be printed out if you press the Test Print Switch.
(Service purposes only.)
Enter Key Selected job is defined. (User Mode)
* (Asterisk) Key Function selection (User Mode)
(Right Arrow) Key Mode selection (Increment) (User Mode )
(Left Arrow) Key Mode selection (Decrement) (User Mode)
Menu Key Menu selection (User Mode)