Konica Minolta KIP 7000 - Manual (Page 99)

3-4 Section 3 ?” Screen
2.0 Main Screen - Details
2.1 Information Region
This area of the Screen includes meter counts and software versions
.
2.1.1 Meter A
Displays the total number of units run on the printer. This counter should match the hard
counter on the right mid- front section on the printer. This unit is in square feet in North
America and in Square Meters in all other countries (when printer set to metric mode).
English mode: 1 count = one square foot
Metric Mode: 1 count = one square meter
NOTE
If this counter differs from the hard counter on the printer contact your local
service company!
The units of this counter are taken from the internal processor of the printer and
can be “reset” if care is not taken upon replacement of the DC Controller.
Please see KIP 7000 Service Manual for details on the setting procedures.
In case of discrepancies: The hard counter shall be taken as the correct value!