Konica Minolta KIP 7000 - Manual (Page 199)

Section 6 Request 6-43
FolderOutputOrientation
Defined as landscape =0, portrait=1, reverse landscape=2, reverse portrait=3. The PPT
Unattend uses this information combined with “FolderOriginalOrientation” to calculate a
final rotation parameter used in creation of the TIF Pack bit file before printing. Note: When
using the KIP Folder all images must print in Portrait mode with title block exiting the printer
last in order to fold properly and finish with the title block showing.
FolderRollSize
This is used to lock printing to a specific roll size used in folding this document. Valid
values are 0=36” roll, 1=34”, 2=30”, 3=24”, 4=22”, 5=18”, 6=17”, 7=12”, 8=11”, 9=8.5” or the
word “Closest”. If using a value 0-9, the controller will prompt the user for this media size
before continuing to print. This will stop the printer and other jobs from printing until the
user inserts this size of media. If “Closest” is used, the Controller will use the media that fits
the image the best after applying the rotation specified. Note: If using Force Size feature of
the Job Ticket you must also use the same Roll Size for Force Size in FolderRollSize of
the .FLD file.
FolderPreset=2
This refers to the preset in the Kipfoldpreset.ini. The settings defining packet size, margin,
and fan and cross fold settings are set in the kipfoldpreset.ini by the technician at the
controller. As a feature of Request 5 SR3, user can display the names of these settings in
the new Rotate / Fold menus. The Request obtains a copy of the kipfoldpreset.ini from the
current Log Directory (Log Directory as set in Unattend, Configuration, Miscellaneous
Setup) named “presets.ini”.