Konica Minolta KIP 7000 User Manual
Page 46
Section 1 Basic Printer Functions
1-40
“Dehumidify Heater Switch” is located on the left-rear side of the machine.
Press “H” to turn on the Dehumidify Heater.
NOTE
(1) There are several dehumidifying settings that can be set by a certified service
technician. These settings establish the dehumidifier functions. For any setting to
function properly, the printer must be plugged in and the switch noted below must be in
the “ON” position.
Call your certified service technician if you would like to change the setting.
Note: the user can not change the setting.
(2) To achieve the best image quality, we recommend that you remove manufacture
packaging just before installing it into the printer. If media is unpacked long before
installation, poor image quality may occur.
Dehumidify Heater Switch