Konica Minolta KIP 7000 - Manual (Page 198)

Section 6 Request 6-42
6. 0 Appendix
6.1 Folding - Technical description
Fold parameters are assigned similar to Stamp (.STP) files and Pen Table (.PEN) files as
explained in the KIP Job Ticket Integration Information. In the job ticket folder, there is a job
sub-folder containing text files that refer to the .STP, .PEN files for stamping and pen tables,
there is now a new file referred to as a .FLD file that contains fold parameters.
In Stamping a particular image, the job sub-folder must contain files such as 0000.SSP
which contains the name of the .STP file associated with stamping the first image in the job.
The content of the .SSP file is actually the name of the .STP file (also in the job sub-folder)
to be used by the Unattend program in stamping a particular image. Subsequent images
are stamped by using 0001.SSP, 0002.SSP to stamp image number 2 and 3 in the job.
The numbering refers to the order of the documents in the .KIP ASCII Job Ticket. This
method is duplicated for setting a fold parameter to work with image number 1, using
0000.FLP, then image 2 using 0001.FLD etc.
Action Actual File Reference File:
Stamp .STP, default.stp, not
for construction.stp,
etc.
0000.SSP, 0001.SSP, 0002. SSP
containing a .STP filename to apply to
document 1, 2, 3 as listed in .KIP ASCII
Job Ticket.
Pen Table .PEN, default.pen, etc. 0000.PPN, 0001.PPN, 0002.PPN referring
to .PEN filename to apply to document 1,
2, 3 as listed in .KIP ASCII Job Ticket
Fold .FLD, default.fld,
36x24.fld, etc. 0000.FLP, 0001. FLP, 0002. FLP referring
to .FLD filename to apply to document 1,
2, 3 as listed in .KIP ASCII Job Ticket
.FLD File Contents (sample)
[KipFolderSettings Ver. 1.0]
FolderOriginalOrientation=0
FolderOutputOrientation=1
FolderRollSize=0
FolderPreset=2
Definitions of the .FLD
FolderOriginalOrientation
Defined as landscape =0, portrait=1, reverse landscape=2, reverse portrait=3. The PPT
Unattend uses this information combined with “FolderOutputOrientation” to calculate a final
rotation parameter used in creation of the TIF Pack bit file before printing. Note: When
using the KIP Folder all images must print in Portrait mode with title block exiting the printer
last in order to fold properly and finish with the title block showing.