2) maintenance downloading, Programming for the remote printer – Sharp UP-600 User Manual

Page 36

background image


(2) Maintenance downloading

To update preset data for the IRC system, use this downloading method. The preset data in

the master is downloaded to each satellite without clearing the existing preset data or



Turn the mode switch to the PGM2 position.


Select “MAINTE. D/L” and press the [ENTER] key.

The MAINTENANCE D/L menu will open.


Select a preset data item for maintenance and press

the [ENTER] key.

If needed, enter the code range.


If you wish to download the IRC programming data to

all satellites, select “ALL” and press the [ENTER] key.

If you wish to download the data to certain satellite(s),

select “MACHINE SELECT” and press the [ENTER]

key. In this case, the “MACHINE SELECT” menu will

open. Move the cursor to the corresponding machine

numbers, select “YES” by using the [ • ] key to toggle

your selection, and press the [ENTER] key.

This manual is related to the following products: