2) error messages – Sharp UP-600 User Manual
(2) Error messages
When an error occurs, a corresponding error message is displayed.
For a description of the error messages, see the “List of error messages” below.
List of error messages
Error message (Default)
The target machine is busy.
The GLU code or related memory file is not enough.
The server who entered a GLU/PBLU code was not authorized.
The specified server code is not present in the master.
The entered GLU/PBLU code is not listed.
CODE NOT FREE
The specified server has signed on at another machine.
The entered GLU/PBLU code is in use.
The power was not turned on.
The T-LOG file is full.
IRC initial D/L before resetting.
IRC Download file type mismatch.
Entry is executed in close store state.
IS SIGNED ON
IRC server sign-on error (when all server resetting executed).
Master does not reply to the request.
Backup master does not reply to the request.
System retry message.
To clear the error message displayed, press the [CL] key.
Please consult your authorized SHARP dealer to remedy the cause for the error condition.