Sharp UP-600 User Manual
11. Downloading the contents of the remote printer
programming to satellites — master
When you have completed the remote printer programming, you can distribute the preset data
from the master to all satellites in the IRC system.
Turn the mode switch to the PGM2 position.
Select “INITIAL D/L” and press the [ENTER] key.
The INITIAL D/L menu will open. Select “KP PRESET”
and press the [ENTER] key.
If you wish to download the KP PRESET data to all
satellites, select “ALL” and press the [ENTER] key. If
you wish to download the data to certain satellite(s),
select “MACHINE SELECT” and press the [ENTER]
key. In this case, the MACHINE SELECT menu will
open. Move the cursor to the corresponding machine
numbers, select “YES” by using the [ • ] key to toggle
your selection, and press the [ENTER] key.
Check if all the satellites in the IRC system have received the preset data for the remote printer.