Document Outline

• Cover-top
• SAFETY INSTRUCTIONS
• Procedure of Reading This Manual
• Contents
• Chapter 1 An Introduction of Embroidery Machine
  • 1. Specifications
  • 2. Software
    • 2-1 Necessary Systems
    • 2-2 Configuration of Software
    • 2-3 Notes on use
    • 2-4 Help
    • 2-5 Basic Operation of Software
    • 2-6. Handling of floppy disk
• Chapter 2 Preparation of Embroidery Machine
  • 1. Names of Machine Components
  • 2. Installation
    • 2-1 Transportation of Machine
    • 2-2 Installation of Machine
    • 2-3 Preparation of Needle Bar Case
    • 2-4 Mounting of Table
    • 2-5 Mounting of Cotton Stand
    • 2-6 Lubrication to Needle Bar Case
    • 2-7 Connection of Personal Computer to Machines (for connecting 4 sets)
    • 2-8 Connection of Power Supply
    • 2-9 Installation of Software
  • 3. Preparation for Embroidering
    • 3-1 Upper Threading
    • 3-2 Replacement of Bobbin
    • 3-3 Replacing and Selecting Needle
    • 3-4 Attachment of Embroidery Hoop and Frame
    • 3-5 Adjustment of Thread Tension
• Chapter 3 Embroidering Procedures
  • Functions of Operation Panel
    • Operation Panel
    • Switches at Machine Heads
    • Switches on Tension Plate
    • Flowchart of Preparation for Embroidering
      • Run the Software
      • Turn on the Machine Power
      • Register the Machine Name
      • Retrieve the Embroidery Data
      • Start Embroidering
• Chapter 4 Selecting and Transferring Embroidery Data
  • Functions (Command Reference)
  • Description of Screen
  • Creating a Directory
  • Transferring data
  • Copy
    • Select from Menu
    • Drag Data
  • Moving Data
    • Select from Menu
    • Drag Data
  • Deleting Data
  • Recreate an icon
  • Select all
  • Renaming Data
  • Finding Data
  • Adjusting Screen Display
  • Reading Data in Floppy Disk
    • Reading DOS Format Data
    • Converting the Non DOS format data
  • Reading Data in Paper Tape
  • Settings for Data Reading
  • Writing Data in DST Format
  • Viewing Pattern Information
• Chapter 5 Editing Embroidery Data
  • Functions (Command Reference)
  • Description of Screen
  • Opening Embroidery Data
  • Setting Display
    • Centering
    • Zoom
    • Needle Penetration
    • Embroidering Start/End
    • Trim and pause
    • Microstitch
    • Needle Bar and Speed Range
    • Thread Color
    • Tool bar
    • Status Bar
  • Back to Previous Status
    • Undo
    • Redo
  • Editing
    • Rotate
    • Horizontal Flip
    • Vertical Flip
    • Point Symmetry
    • Repeat
    • Resize
    • Delete Stitch
    • Insert or Delete Code
    • Insert Lock Stitch
  • Changing Data
    • Changing Start
    • Changing End
    • Mask
  • Group
    • Setting Group for Repetition
    • Selecting from Menu
  • Merge
  • Saving Data
    • Save
    • Save As...
  • Viewing Pattern Information
  • Printing Data
• Chapter 6 Embroidering
  • Functions (Command Reference)
    • When the Power to the Machine is Off
    • When the Power to the Machine is On
  • Description of Screen
  • Settings before Turning On the Machine
    • Displaying the Tool Bar
    • Displaying the Status Bar
    • Upgrading the Version of Interface Board
    • Reset Interface Board
    • Communication Port
    • Language
  • Settings after Turning Power On
    • Tool Bar
    • Status Bar
    • Zoom In
    • Zoom Out
    • Zoom In Specified Range
    • Fit to Window
    • Whole Pattern
    • Grid
    • Hoop
    • Hoop position fine adjustment
    • Needle Penetration
    • Thread Color
    • Needle Bar and Speed Range
    • Setting Needle Bar
    • Setting Ranges
    • Grid Setting
    • Background color
    • Renaming Machine
    • Viewing Machine Information
    • Design Information
    • Setting Window Display
    • Minimizing and Aligning Windows
    • Language
    • Copying Data to Other Machines
    • Configuration
    • Upgrading the Machine Program
  • Setting the Machine
    • Needle Bar
    • Same Speed Range
    • Pause
    • Speed Range
    • Head Operation Suspend
    • Hoop Feed Position
    • Embroidery Area
    • Embroidery Hoop
    • Thread Trimming
    • Boring
    • Thread Breakage Sensor
    • Automatic Step Back
    • Automatic Hoop Feed
    • End of embroidery
    • Mending
    • Adjust
    • Activating speed up of driving shaft
    • Activate escape with pause
    • Short stitch speed reduction
    • Thin Material or Thick Material
    • Area Trace
    • Default Settings
    • Show Setting
    • Load Setting
    • Save Setting
    • Load Hoop
  • Embroidering
    • Starting Embroidering
  • Moving the Home Position
  • Step-forward/Step-back
    • Entering in the Step-forward/Step-back Mode
    • Setting Step-forward/Back Distance or Timing
    • Stepping Forward/Back
    • Resuming Embroidering
  • Moving Embroidery Position
  • Centering Pattern
  • Saving Data
    • Save
    • Save As...
  • Test
  • Running Other Programs
• Chapter 7 Operation of Machine
  • 1. Operating Procedures
    • 1-1 Power Source
    • 1-2 Preparation for Embroidering
  • 2. Stopping the Machine
    • 2-1 Procedure to Stop the Machine
    • 2-2 Resetting Machine Stop
    • 2-3 Emergency Stop of the Machine
    • 2-4 Resetting Emergency Stop
  • 3. Permission for Hoop Movement
  • 4. Measures against Thread Breakage
    • 4-1 Remedies
    • 4-2 Mending
  • 5. Jog Embroidering
  • 6. Hoop Feed Position
  • 7. Area Check
    • 7-1 External Tracing
    • 7-2 Automatic Hoop Movement in Area
  • 8. Jog Switches
    • 8-1 Hoop Movement to Start Position
    • 8-2 Inching Mode during Embroidering (Forcible Hoop Movement)
• Chapter 8 Creating Production Report
  • Functions (Command Reference)
  • Description of Screen
  • Displaying Report
    • Display Example of Details
    • Display Example of Thread Breakage Information on Needle Bar
    • Display Example of Thread Breakage Information in Pattern
    • Display Example of Output Information
    • Display Example of Total Output Information
  • Setting Display Items
    • General
    • Details
    • Thread Breakage Information on Needle Bar
    • Thread Breakage Information in Pattern
    • Output Information
    • Total Output Information
    • Recess Time Setting
  • Save As CSV...
  • Printing Production Report
    • Page Setup
    • Print
  • Copying Report Data
  • Deleting Report
• Chapter 9 Maintenance
  • 1. Cleaning
    • 1-1 Cleaning and Lubrication of Rotary Hook
    • 1-2 Cleaning of Needle Plate
    • 1-3 Cleaning of Lower Shaft Module Fan
  • 2. Oiling
    • 2-1 Head
  • 3. Greasing
    • 3-1 Head
    • 3-2 Feed Guide Section
• Chapter 10 Adjustment
  • 1. Adjusting Needle Bar Height
  • 2. Replacing (Attaching) Rotary Hook
  • 3. Adjustment of Clearance Between Needle and Rotary Hook
  • 4. Adjustment of Timing Between Needle and Rotary Hook
  • 5. Adjustment of Presser Foot Height
  • 6. Adjustment of Thread Trimmer
    • 6-1 Attaching the Fixed Knife
    • 6-2 Checking the Movable Knife Position
  • 7. Thread Wiper Adjustment
  • 8. Adjusting the Belt Tension
• Chapter 11 Error code list
• Chapter 12 Troubleshooting
  • Mechanical Section
  • Electrical Section
  • Personal Computer Section
• Connection and Installation of Optional Equipment
  • Attaching Bobbin Winder
• Cover-last