Apple AppleVision 1710AV - Manual (Page 118)

Connecting the power cord
1 Connect the socket end of the power cord to the power cord receptacle on the back of
the display.
2 Plug the other end of the power cord into a grounded outlet or power strip.
Connecting the display cable
The display cable on your AppleVision1710av Display is a split cable with two
connectors, one for the display and one for the Apple Desktop Bus (ADB).
1 Connect the PC adapter to the display connector (marked by ™ ) on the display cable.
PC adapter
Display port on
IBM PC-compatible
Display connector
121 Setting Up for IBM PC-Compatible Users