Apple AppleVision 1710AV - Manual (Page 84)

IMPORTANT If the Sound control panel doesn’t appear, you may have a
different version of the AppleVision display software. In this case, instructions
in this chapter don’t apply. See Macintosh Guide for instructions on setting
the alert sound. To open Macintosh Guide, choose Macintosh Guide from the
Guide menu (marked with the
h icon).
2 Click the alert sound that you want the computer to use.
3 Drag the slider control up or down to set the volume level.
Note: On some Macintosh computers, the volume control in the Alert Sounds
panel must be set above minimum to hear sound on your AppleVision 1710
AV
Display. For more information, see “Checking Volume Controls on Your
Computer” earlier in this chapter.
Installing an alert sound
Your computer comes with several alert sounds. You can get additional
sounds from various sources.
To install a sound:
1 Drag the sound’s icon to the System Folder icon (not the open System Folder window).
A message appears asking if you want to install the sound.
2 Click OK.
The sound is automatically installed in the System file.
Once you add a sound to the System file, it is listed in the Sound control
panel.
80 Chapter 5